Good Coffee Map

What happens inside an espresso machine: pump, boilers, group head

From the water tank to the cup: how an espresso machine like a La Marzocco creates pressure and temperature, and why two boilers beat one.

Udgivet 22. november 2026

Denne artikel er endnu ikke oversat og vises på engelsk.

~120 °C~93 °C9 bar1234567
  1. 1Waterfrom a tank or a plumbed line, ideally filtered
  2. 2Pumpbuilds about 9 bar of pressure, nine times atmospheric pressure
  3. 3Brew boilerkeeps the water at a steady 93 °C or so
  4. 4Steam boilermuch hotter, supplies steam for the milk
  5. 5Group headat La Marzocco connected directly to the brew boiler (saturated group)
  6. 6Portafilterwater is pushed through the tamped coffee
  7. 7Steam wandfoams the milk with hot steam
Simplified layout of a dual boiler machine. Blue: brew water, red: steam.

The water's journey

  • The pump draws in cold water and pushes it into the boilers.
  • The brew boiler brings it to brewing temperature, the steam boiler heats it far beyond.
  • When the barista presses the button or moves the paddle, brew water flows at about 9 bar through the group into the portafilter.
  • After 25 to 30 seconds the espresso is done.

What happens in the portafilter

  • Water dissolves acids, sugars, oils and bitter compounds from the coffee, roughly in that order.
  • The high pressure squeezes out oils and traps gases from the fresh roast. That's where crema comes from.
  • Pre-infusion: many machines first wet the coffee at low pressure, so the water flows through more evenly.

Three designs

DesignHow it worksAdvantage
Single boilerone boiler for brewing and steamcheap, but not both at once
Heat exchangersteam boiler with a heat exchanger for the brew waterboth at once, temperature varies a bit
Dual boilerseparate boilers for brewing and steamvery stable temperature, standard at La Marzocco
Multi boilereach group has its own brew boilereach group at its own temperature

What makes La Marzocco special

  • In 1970 La Marzocco launched the GS, the first machine with two separate boilers.
  • The saturated group sits right on the brew boiler and is constantly flooded with hot water, so every shot gets the same temperature.
  • Electronic control (PID) holds the temperature to within a tenth of a degree.

What to look for at the counter

  • Two gauges: one shows pump pressure, the other the steam boiler.
  • Paddles instead of buttons: the barista controls the pressure by hand during the shot.
  • A scale under the cup: the espresso is made by weight, not by time.

Mere fra journalen

Set en La Marzocco? Tilføj